Microsoft Windows [Version 6.0.6001] (C) Copyright 2006 Microsoft Corp. c:\windows>netsh interface ipv4 set dnsserver ?
Usage: set dnsserver [name=][source=]dhcp|static
[[address=]|none][[register=]none|primary|both]
Parameters:
Tag Value
name - The name of the interface.
source - One of the following values:
dhcp: Sets DHCP as the source for configuring DNS
servers for the specific interface.
static: Sets the source for configuring DNS servers
to local static configuration.
address - One of the following values:: An IP address for a DNS server.
none: Clears the list of DNS servers.
register - One of the following values:
none: Disables Dynamic DNS registration.
primary: Register under the primary DNS suffix only.
both: Register under both the primary DNS suffix, as
well as under the connection-specific suffix.
Remarks: Sets DNS server configuration to either DHCP or static mode. Only
when source is 'static', is the 'addr' option also available for
configuring a static list of DNS server IP addresses for the
specified interface.
Examples:
set dnsserver name="Local Area Connection" source=dhcp
set dnsserver "Local Area Connection" static 10.0.0.1 primary