netsh » interface » ipv4 » add » winsservers

Microsoft Windows [Version 6.1.7000]
(C) Copyright 2009 Microsoft Corp.
C:\Windows>netsh interface ipv4 add winsservers ? Usage: add winsservers [name=] [address=] [[index=]] Parameters: Tag Value name - The name or index of the interface where WINS servers are added. address - The IP address for the WINS server you are adding. index - Specifies the index (preference) for the specified WINS server address. Remarks: Adds a new WINS server IP address to the statically-configured list. By default, the WINS server is added to the end of the list. If an index is specified, the WINS server will be placed in that position in the list, with other servers being moved down to make room. If WINS servers were previously obtained through DHCP, the new address will replace the old list. Examples: add winsservers "Local Area Connection" 10.0.0.1 add winsservers "Local Area Connection" 10.0.0.3 index=2

NETSH / INTERFACE / IPV4 / ADD / WINSSERVERS


Quick - Link:
netsh interface portproxy show all
Shows all port proxy parameters.
netsh interface ipv6 show tcpstats
Displays TCP statistics.
netsh interface ipv6 reset
Reset the IP configurations.
netsh interface ipv6 6to4 show interface
Shows the 6to4 interface configuration information.








Windows-10


... Windows 10 FAQ
... Windows 10 How To


Windows 10 How To


... Windows 11 How To
... Windows 10 FAQ



Adds a static WINS server address. / Windows 10, 8.1, Seven

HTTP: ... cmd/en/Windows_7/netsh/interface/ipv4/add/winsservers.htm
0.061
17428
Activate / deactivate the TelNet client under Windows 11, 10, 8.1, ...!
Anpassen der maximalen Prozessor Frequenz / Leistung unter Windows!
Mobilen Hotspot unter Windows 11/10 für gemeinsame Internet Nutzung!
Kostenlose Minianwendungen Windows 10?
Changing the settings for mains operation and idle state!
So ändern Sie die Höhe oder Breite der Taskleiste unter Windows 10!
Clear the temporary Windows 10/11 directory!
Enable and disable drive compression on Windows 10/11!
Durchsichtige Symbole am Windows 10 und 11 Desktop entfernen?
Windows 10 / 11 cmd shell:programfilesx86 and shell:programfiles!



(0)