|
|
Windows 11 netsh dnsclient command
Microsoft Windows [Version 10.0.22621.2428] (c) Microsoft Corporation.
C:\Windows>netsh dnsclient ?
The following commands are available:
Commands in this context:
? - Displays a list of commands.
add - Adds a configuration entry to a table.
delete - Deletes a configuration entry from a table.
dump - Displays a configuration script.
help - Displays a list of commands.
set - Sets configuration information.
show - Displays information.
To view help for a command, type the command, followed by a space, and then
type ?.
Adds a configuration entry to a table.
C:\Windows>netsh dnsclient add ?
The following commands are available:
Commands in this context:
add dnsservers - Adds a static DNS server address.
add encryption - Adds an encrypted DNS server template.
add global - Adds a global DNS configuration.
add interface - Adds interface specific DNS settings.
Adds a static DNS server address.
C:\Windows>netsh dnsclient add dnsservers ?
Usage: add dnsservers [name=]<string> [address=]<IP address>
[[index=]<integer>] [[validate=]yes|no]
Parameters:
Tag Value
name - The name or index of the interface where DNS
servers are added.
address - The IP address for the DNS server you are adding.
index - Specifies the index (preference) for the specified
DNS server address.
validate - Specifies whether validation of the DNS server setting
will be performed. The value is yes by default.
Remarks: Adds a new DNS server IP address to the statically-configured list.
By default, the DNS server is added to the end of the list. If an
index is specified, the DNS server will be placed in that position
in the list, with other servers being moved down to make room.
If DNS servers were previously obtained through DHCP, the new
address will replace the old list. If Validate switch is yes,
then the newly added DNS server is validated.
Adds an encrypted DNS server template.
C:\Windows>netsh dnsclient add encryption ?
Usage: add encryption [server=]<IP address> [dohtemplate=]<string> [[autoupgrade=]yes|no] [[udpfallback=]yes|no]
Parameters:
Tag Value
server - The IP address for the encrypted DNS server to be
added.
dohtemplate - The DoH template to use for the server.
autoupgrade - Whether queries to this server should be automatically
upgraded to DoH.
udpfallback - Whether UDP/TCP should be attempted for this server if
DoH queries fail.
Remarks: Adds a new encrypted DNS server template to the
statically-configured list of secure resolvers.
Adds a global DNS configuration.
C:\Windows>netsh dnsclient add global ?
Usage: add global [[doh=]yes|no|auto] [[ddr=]yes|no]
Parameters:
Tag Value
doh - The global DNS-over-HTTPS setting. The available
options are:
no: forbids the use of DoH by the DNS client
yes: allows DoH use based on interface, server,
or other configurations
auto: forces all well-known DoH servers to use only DoH
ddr - The global DDR setting. The available
options are:
no: disables the use of DDR by the DNS client
yes: enables DDR use based on interface, server,
or other configurations
Remarks: Adds a global DNS configuration option.
Adds interface specific DNS settings.
C:\Windows>netsh dnsclient add interface ?
Usage: add interface [name=]<string> [[ddr=]yes|no] [[ddrfallback=]yes|no]
Parameters:
Tag Value
name - The name or index of the interface to be configured.
ddr - The interface specific DDR setting.
The available options are:
yes: perform DDR on all unencrypted servers configured
on the specified adapter
no: do not perform DDR by default on unencrypted servers
configured on the specified adapter
ddrfallback - If per adapter DDR is enabled, specifies if the servers should
fallback to unencrypted name resolution if the secure resolution
using the DDR retrieved settings failed.
Fallback is disabled by default.
The available options are:
yes: enables fallback to unencrypted name resolution
no: disables fallback to unencrypted name resolution
Remarks: Adds interface specific DNS settings.
Deletes a configuration entry from a table.
C:\Windows>netsh dnsclient delete ?
The following commands are available:
Commands in this context:
delete dnsservers - Deletes the DNS server from the specified interface.
delete encryption - Removes an encrypted DNS server template.
delete global - Restores global DNS settings to their default values.
delete interface - Restores DNS interface specific settings to their default values.
Deletes the DNS server from the specified interface.
C:\Windows>netsh dnsclient delete dnsservers ?
Usage: delete dnsservers [name=]<string> [[address=]<IP address>|all] [[validate=]yes|no]
Parameters:
Tag Value
name - The name or index of the interface where DNS
servers are deleted.
address - One of the following values:
<IP address>: A specific IP address of a DNS server
you are deleting.
all: Deletes all configured IP addresses for DNS. servers.
validate - Specifies whether validation of the DNS server setting
will be performed. The value is yes by default.
Remarks: Deletes statically configured DNS server IP addresses for a
specific interface. If Validate switch is yes, then the remaining
DNS servers are validated.
Examples:
delete dnsservers "Wired Ethernet Connection" all
Removes an encrypted DNS server template.
C:\Windows>netsh dnsclient delete encryption ?
Usage: delete encryption [server=]<IP address>
Parameters:
Tag Value
server - The IP address for the encrypted DNS server to be
removed.
Remarks: Removes an encrypted DNS server template from the
statically-configured list of secure resolvers.
Restores global DNS settings to their default values.
C:\Windows>netsh dnsclient delete global ?
Usage: delete global [global=](doh|ddr|all)
Parameters:
Tag Value
global - The global DNS setting to be restored to its default
value. The available options are:
all: restores all settings to their default values
doh: restores the default DoH global setting
ddr: restores the default DDR global setting
Remarks: Restores DNS settings to their default values.
Restores DNS interface specific settings to their default values.
C:\Windows>netsh dnsclient delete interface ?
Usage: delete interface [name=]<string> [setting=](ddr|all)
Parameters:
Tag Value
name - The name or index of the interface to be configured.
setting - The interface DNS setting to be restored to its default
value. The available options are:
all: restores all settings to their default values
ddr: restores the default DDR global setting
Remarks: Restores interface DNS settings to their default values.
Displays a configuration script.
C:\Windows>netsh dnsclient dump ?
Usage: dump
Remarks:
Creates a script that contains the current configuration. If saved to a
file, this script can be used to restore altered configuration settings.
Displays a list of commands.
C:\Windows>netsh dnsclient help ?
Usage: help
Remarks:
Displays a list of commands.
Sets configuration information.
C:\Windows>netsh dnsclient set ?
The following commands are available:
Commands in this context:
set dnsservers - Sets DNS server mode and addresses.
set encryption - Sets an encrypted DNS server template.
set global - Sets a global DNS configuration.
set interface - Sets interface specific DNS settings.
Sets DNS server mode and addresses.
C:\Windows>netsh dnsclient set dnsservers ?
Usage: set dnsservers [name=]<string> [source=]dhcp|static
[[address=]<IP address>|none]
[[register=]none|primary|both]
[[validate=]yes|no]
Parameters:
Tag Value
name - The name or index of the interface.
source - One of the following values:
dhcp: Sets DHCP as the source for configuring DNS
servers for the specific interface.
static: Sets the source for configuring DNS servers
to local static configuration.
address - One of the following values:
<IP address>: An IP address for a DNS server.
none: Clears the list of DNS servers.
register - One of the following values:
none: Disables Dynamic DNS registration.
primary: Register under the primary DNS suffix only.
both: Register under both the primary DNS suffix, as
well as under the connection-specific suffix.
validate - Specifies whether validation of the DNS server setting
will be performed. The value is yes by default.
Remarks: Sets DNS server configuration to either DHCP or static mode. Only
when source is 'static', is the 'addr' option also available for
configuring a static list of DNS server IP addresses for the
specified interface. If Validate switch is yes, then
the newly set DNS server is validated.
Examples:
set dnsservers name="Wired Ethernet Connection" source=dhcp
Sets an encrypted DNS server template.
C:\Windows>netsh dnsclient set encryption ?
Usage: set encryption [server=]<IP address> [dohtemplate=]<string> [[autoupgrade=]yes|no] [[udpfallback=]yes|no]
Parameters:
Tag Value
server - The IP address for the encrypted DNS server to be
modified.
dohtemplate - The DoH template to use for the server.
autoupgrade - Whether queries to this server should be automatically
upgraded to DoH.
udpfallback - Whether UDP/TCP should be attempted for this server if
DoH queries fail.
Remarks: Sets an encrypted DNS server template in the
statically-configured list of secure resolvers.
Sets a global DNS configuration.
C:\Windows>netsh dnsclient set global ?
Usage: set global [[doh=]yes|no|auto] [[ddr=]yes|no]
Parameters:
Tag Value
doh - The global DNS-over-HTTPS setting. The available
options are:
no: forbids the use of DoH by the DNS client
yes: allows DoH use based on interface, server,
or other configurations
auto: forces all well-known DoH servers to use only DoH
ddr - The global DDR setting. The available
options are:
no: disables the use of DDR by the DNS client
yes: enables DDR use based on interface, server,
or other configurations
Remarks: Sets a global DNS configuration option.
Sets interface specific DNS settings.
C:\Windows>netsh dnsclient set interface ?
Usage: set interface [name=]<string> [[ddr=]yes|no] [[ddrfallback=]yes|no]
Parameters:
Tag Value
name - The name or index of the interface to be configured.
ddr - The interface specific DDR setting.
The available options are:
yes: perform DDR on all unencrypted servers configured
on the specified adapter
no: do not perform DDR by default on unencrypted servers
configured on the specified adapter
ddrfallback - If per adapter DDR is enabled, specifies if the servers should
fallback to unencrypted name resolution if the secure resolution
using the DDR retrieved settings failed.
Fallback is disabled by default.
The available options are:
yes: enables fallback to unencrypted name resolution
no: disables fallback to unencrypted name resolution
Remarks: Sets interface specific DNS settings.
Displays information.
C:\Windows>netsh dnsclient show ?
The following commands are available:
Commands in this context:
show encryption - Shows an encrypted DNS server template.
show global - Shows globally configured DNS settings.
show state - Shows the dns state.
Shows an encrypted DNS server template.
C:\Windows>netsh dnsclient show encryption ?
Usage: show encryption [[server=]<IP address>]
Parameters:
Tag Value
server - The IP address for the encrypted DNS server to be
displayed.
Remarks: Shows an encrypted DNS server template from the
statically-configured list of secure resolvers.
If no server is specified, all templates in the list are displayed.
Shows globally configured DNS settings.
C:\Windows>netsh dnsclient show global ?
Usage: show global
Parameters: none
Remarks: Displays all configured DNS global settings.
Shows the dns state.
C:\Windows>netsh dnsclient show state ?
Shows the dns state.
- de -/ - en -
|
|
|
>
... Windows 10 FAQ
... Windows 10 How To
... Windows 11 How To
... Windows 10 FAQ
|
HTTP: ... console/en/index.htm
|
|
|
0.171
8563
(0)
| |